What I thought was a bad head gasket on my street 02 Daytona, has turned out to be a smoked set of rings. I'm thinking about having some basic machine work done while I have it apart, like the crank knife edged and rebalanced, a good set of pistons and rings.
Who would yall recommend?
Using Tapatalk
Falicon
http://www.faliconcranks.com/
I would contact Steve Upchurch with RES and ask what he would do.
BC975
Village Idiots #1
RES - Upchurch - #1
+1 On Steve Upchurch at RES, he does the best work and he will give you the best advice on which direction to go with your motor. I will also add that he is very easy to deal with and very easy to get in touch with. My experience with him has been nothing less than great, do yourself a favor and give him a call.
+2 for Steve.. He has had his hands in pretty much every winning machine on the cmra's grids.
Expert #425
2016 ESSE ULWE 2nd Place
2018 250 ULWE Class Champion!
2019 500 SS ULWE Class Champion! 2019 ULWE Overall Champion!
2020 500 SS ULWE Class Champion! 2020 ULWE Overall Champion!
+3 on Steve
Lone Star Track Days www.lstd.com - Vesrah Brake Pads - 212Decals.com
+4 for Steve
http://www.racingenginesvc.com
11725 E. FM 917, Alvarado, Texas 76009
Telephone: (817) 783-6699
Bill Klindworth
68 Still kicking... just a bit slower #737
Posting Permissions
