Results 1 to 6 of 6

Thread: Cresson, asphalt pitting within turn seams

  1. #1
    Senior Member
    Join Date
    Dec 2011
    Location
    Carrollton, TX
    Status
    Expert
    Bike #
    628
    Posts
    485

    Cresson, asphalt pitting within turn seams

    Can anything be done about this with track management...?
    I was having the best race of my time in CMRA, and unfortunately got taken out by one of these poorly maintained seams...
    It's quite difficult to maintain traction when there's a 2+" gap in the road surface, and leaned over as far that we do!
    YouTube "N7HEVN"
    2011 / 2012 / 2013 / 2016, #628

  2. #2
    Steve McNamara
    Guest
    Greg,

    We will do our best to get the Management at MSRC to address this situation.

    Steve

  3. #3
    Senior Member
    Join Date
    Dec 2011
    Location
    Carrollton, TX
    Status
    Expert
    Bike #
    628
    Posts
    485
    Thank you Steve. Horseshoe especially needs attention.
    I may be mistaken, but I suspect that ridiculous bump in Buzzards Neck, had caused another downed-rider, earlier in Formula 1. Can that bump, and the one in Ricochet be addressed also with the track management, for repair?
    YouTube "N7HEVN"
    2011 / 2012 / 2013 / 2016, #628

  4. #4
    Senior Member
    Join Date
    Dec 2011
    Location
    Carrollton, TX
    Status
    Expert
    Bike #
    628
    Posts
    485
    As we're a week away from the next Cresson event, what's the status on this?
    YouTube "N7HEVN"
    2011 / 2012 / 2013 / 2016, #628

  5. #5
    Administrator Walter Walker's Avatar
    Join Date
    Aug 2002
    Location
    Waco Texas
    Status
    Expert
    Bike #
    43R
    Posts
    7,236
    Quote Originally Posted by Greg Gilstrap View Post
    As we're a week away from the next Cresson event, what's the status on this?
    MSR management is aware of the problem and have a plan in place to make repairs. Unfortunatly the heat not only has made the issue worse it also makes repairs difficult. In the mean time we will mark the bad areas with paint to at least make them more visible.
    Walter Walker
    Director of Competition
    254-717-6848
    walter@cmraracing.com
    CMRA Ex #43r
    Member since 1990
    (NOT mean and unapproachable)

  6. #6
    Senior Member
    Join Date
    Dec 2011
    Location
    Carrollton, TX
    Status
    Expert
    Bike #
    628
    Posts
    485
    Thank you Walter, your effort to resolve/remedy this is appreciated.
    YouTube "N7HEVN"
    2011 / 2012 / 2013 / 2016, #628

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •