Wondering if someone could measure the length of the shift lever from center of splint to center of lever. Please
Trying to convert an Ohvale for someone with big feet - looks like the CRF50 shift lever might be the solution.
Wondering if someone could measure the length of the shift lever from center of splint to center of lever. Please
Trying to convert an Ohvale for someone with big feet - looks like the CRF50 shift lever might be the solution.
Rab McNaught #430
2022 Race Bikes: 2021 KTM Super Duke R, 2020 Yamaha R1, 2022 Yamaha R7, 2021 Kawasaki Ninja 400 (endurance)
Former BoD member: 2018 to 2021
Center to center on the Ohvale shifter is 135mm...alternatively, anyone know of one shorter, like 110mm and with no, or almost no, offset.
Last edited by Rab McNaught; 04-07-2019 at 06:49 PM.
My 50 shift lever has been bent so many times it might not be a good measuring tool. If you can give me a diagram or picture of where you need the measurements from, I'll be more that glad to try and get some for you.
https://www.dropbox.com/s/78jyqasfua...43.45.jpg?dl=0
Yes. Above is what I have. Looking for something shorter and preferably no offset.
Sent from my iPhone using Tapatalk
Rab McNaught #430
2022 Race Bikes: 2021 KTM Super Duke R, 2020 Yamaha R1, 2022 Yamaha R7, 2021 Kawasaki Ninja 400 (endurance)
Former BoD member: 2018 to 2021
Rab McNaught #430
2022 Race Bikes: 2021 KTM Super Duke R, 2020 Yamaha R1, 2022 Yamaha R7, 2021 Kawasaki Ninja 400 (endurance)
Former BoD member: 2018 to 2021
xr100 is straight looks like what you got in the pic. look at the p/n s they probably are the same. I'll try to find one tonight and measure it for you.
Different part numbers. Can't really tell from the parts fiche whether either is likely to be longer than the other. My hope is that the CRF50F will be shorter, just because it's a shorter form factor of bike.
I'm also making an assumption here that every spline is identical - diameter of about 11mm and have the same number of teeth. Ohvale 160cc engines are generic, made in China engines and look the same as a grom engine, so I'm hoping that these engines follow Japanese standards.
CRF50F
PEDAL, GEARSHIFT (COO) (24701-GEL-305)
XR100
PEDAL, GEARSHIFT
24701-KSJ-305 Supercedes: 24701-KN4-A60
CRF50 lever is curved to get around the "clutch" basket. Also appears to be offset by about 1cm ...and, yes. 105mm
Could you measure the length please ? I can deal with 1cm offset. That’s not too much compared to a TTR125
Sent from my iPhone using Tapatalk
Rab McNaught #430
2022 Race Bikes: 2021 KTM Super Duke R, 2020 Yamaha R1, 2022 Yamaha R7, 2021 Kawasaki Ninja 400 (endurance)
Former BoD member: 2018 to 2021