Results 1 to 2 of 2

Thread: AiM SOLO 2 DL ECU RPM Issue

  1. #1
    Member
    Join Date
    Oct 2004
    Location
    Carrollton, TX
    Status
    Novice
    Bike #
    273
    Posts
    39

    AiM SOLO 2 DL ECU RPM Issue

    2012 Yamaha R6

    The RPM value on the datalogger always shows 17,500, but it is reading the air and water temp from the ECU. If I move it to another R6 it does read the ECU RPMs. A previous owner of the bike had Bauce Racing flash the ECU using the older Flash Tune method back in 2014. I've spoken to Bauce and AiM and neither one of them knew how to resolve the situation. AiM suggested trying a different cluster, but that didn't help.

    Anyone have any suggestions?
    James LeRoy #273
    Surreal Racing

    "The only difference between a mad man and me is that I'm not mad" -Salvador Dali

  2. #2
    Senior Member
    Join Date
    Apr 2011
    Location
    Dallas, Texas
    Status
    Expert
    Bike #
    42
    Posts
    851
    We use this unit. You could try asking Brandon.

    http://www.themetricgarage.com/
    Sometimes the journey is more important than the destination.
    Racing support: The Metric Garage

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •