Results 1 to 8 of 8

Thread: FS: Race Stuff, Pit Bull Stands, Bodywork, Radiator, Etc.

  1. #1
    Senior Member
    Join Date
    Jan 2004
    Location
    Fort Worth, TX
    Posts
    1,610

    FS: Race Stuff, Pit Bull Stands, Bodywork, Radiator, Etc.

    Two front Pit Bull Stands - One 'Under the Bottom of the Forks' style - $100, One 'Under the Triple Clamp' style with 16mm interchangeable pin - $100. Both in good condition.

    2004/2005 Suzuki GSX-R600/750 fiberglass tail section, uses stock seat. Suzuki blue and black, good condition, no cracks. $50

    Suzuka front tire warmer for big bike, single temp, good condition. $50

    Second generation Suzuki SV650 radiator in good condition. $20

    2008-2012 Ninja 250 stock head pipes and mid-pipe, no muffler, in good condition. $20

    2013-2016 Ninja 300 inner rear fender, good condition. $10

    Honda RS125/RS85 fiberglass fairing lowers - Two '91 to '94 lowers, good condition, one '95+ lower, a bit rough. $10 for one or take all three for $20.

    I was too lazy to post photos. If you're interested in something, email or text me and I'll send a you some pics.

    I can bring any/all of this to the CMRA race at MSRH.

    Bill Syfan
    bsyfan at gmail dot com
    817 fivetwotwo 2241

  2. #2
    Senior Member
    Join Date
    Jan 2004
    Location
    Fort Worth, TX
    Posts
    1,610
    The front Pit Bull 'Under the Triple Clamp' stand is sold.

    Bill

  3. #3
    Senior Member
    Join Date
    Jan 2013
    Location
    Houston, NW side
    Status
    Novice
    Bike #
    228
    Posts
    139
    email sent about the SV radiator
    Sloan Essman # 228
    07 SV650s

  4. #4
    Administrator Walter Walker's Avatar
    Join Date
    Aug 2002
    Location
    Waco Texas
    Status
    Expert
    Bike #
    43R
    Posts
    5,486
    Quote Originally Posted by Sloan Essman View Post
    email sent about the SV radiator
    Damn you beat me to it.
    Walter Walker
    Director of Competition
    254-717-6848
    walter@cmraracing.com
    CMRA Ex #43r
    Member since 1990
    (NOT mean and unapproachable)

  5. #5
    Senior Member
    Join Date
    Jan 2013
    Location
    Houston, NW side
    Status
    Novice
    Bike #
    228
    Posts
    139
    Quote Originally Posted by Walter Walker View Post
    Damn you beat me to it.
    After next weekend I might have one I'll sell you for $40. lol

    Just kidding though. I need this one for my '07
    Sloan Essman # 228
    07 SV650s

  6. #6
    Administrator Walter Walker's Avatar
    Join Date
    Aug 2002
    Location
    Waco Texas
    Status
    Expert
    Bike #
    43R
    Posts
    5,486
    Quote Originally Posted by Sloan Essman View Post
    After next weekend I might have one I'll sell you for $40. lol

    Just kidding though. I need this one for my '07
    No worries man. I'm building Trey a second gen for next season for a few MotoAmerica rounds. This was mainly for a spare.
    Walter Walker
    Director of Competition
    254-717-6848
    walter@cmraracing.com
    CMRA Ex #43r
    Member since 1990
    (NOT mean and unapproachable)

  7. #7
    Senior Member
    Join Date
    Jan 2004
    Location
    Fort Worth, TX
    Posts
    1,610
    I have some more stuff . . .

    Stockton (Cycle Gear) chain tool kit, brand new, never opened, retails for $90 - $40

    2008 to 2012 Ninja 250 fiberglass tail section, a little rough but fixable - $20

    D&D exhaust canister, aluminum finish, a few scrapes, 50mm inlet, 16" long - $20

  8. #8
    Senior Member
    Join Date
    Jan 2004
    Location
    Fort Worth, TX
    Posts
    1,610
    I'll have everything with me, pitted near the front gate.

    Bill

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •