Results 1 to 8 of 8

Thread: Parting Out '00 R6

  1. #1
    Senior Member Jesse Davis's Avatar
    Join Date
    Aug 2002
    Status
    Expert
    Bike #
    37
    Posts
    2,281

    Parting Out '00 R6

    '00 blueprinted motor 105hp $1000
    clean title frame $2000
    R6 Triples $50
    R1 Forks and Triples $500
    axle $10
    wheels with rotors $500
    street bodywork with lights and tank, as is $500, painted $900
    extra white/red '99 street tail. $125
    R1 front fender $60
    attack rearsets perfect $300
    scott's damper $250
    stock fairing bracket $50
    graves fairing bracket $40
    R1 stock clip ons $50
    R6/R1 clutch perches with levers $20 ea
    brembo radial mc with remote adjuster $200
    front calipers $100
    rear caliper $50
    front kevlar lines $40
    rear kevlar line $20
    full stainless M4 hi pipe with new spigots $200
    passenger seat $20
    riders seat $25
    riders seat (small tear) $10
    extra tank $125
    '01 wiring harness $50
    '01 carbs $100
    '01 black box $100
    factory pro velocity stacks $100
    factory case covers $100 ea
    race teched rear shock $75
    swingarm $50
    sprockets front and rear assorted. $50
    brand new LP windscreen $25
    used LP windscreen $20
    guages $40
    perfect subframe $125
    cut teaked subframe $20
    beat up tank $50
    extra rear rotor $40
    extra cush drive $25

    email me for details, stuff goes on ebay in a week.

    Jesse

    cyclepunk@hotmail.com

  2. #2
    Senior Member Jesse Davis's Avatar
    Join Date
    Aug 2002
    Status
    Expert
    Bike #
    37
    Posts
    2,281

    Parting Out '00 R6

    '00 blueprinted motor 105hp $1000
    clean title frame $2000
    R6 Triples $50
    R1 Forks and Triples $500
    axle $10
    wheels with rotors $500
    street bodywork with lights and tank, as is $500, painted $900
    extra white/red '99 street tail. $125
    R1 front fender $60
    attack rearsets perfect $300
    scott's damper $250
    stock fairing bracket $50
    graves fairing bracket $40
    R1 stock clip ons $50
    R6/R1 clutch perches with levers $20 ea
    brembo radial mc with remote adjuster $200
    front calipers $100
    rear caliper $50
    front kevlar lines $40
    rear kevlar line $20
    full stainless M4 hi pipe with new spigots $200
    passenger seat $20
    riders seat $25
    riders seat (small tear) $10
    extra tank $125
    '01 wiring harness $50
    '01 carbs $100
    '01 black box $100
    factory pro velocity stacks $100
    factory case covers $100 ea
    race teched rear shock $75
    swingarm $50
    sprockets front and rear assorted. $50
    brand new LP windscreen $25
    used LP windscreen $20
    guages $40
    perfect subframe $125
    cut teaked subframe $20
    beat up tank $50
    extra rear rotor $40
    extra cush drive $25

    email me for details, stuff goes on ebay in a week.

    Jesse

    cyclepunk@hotmail.com

  3. #3

    Re: Parting Out '00 R6

    What condition is the extra red/white 99 street tail in?
    Thanks
    Nate Weber
    #15
    #32 Endurance (Project Mayhem)
    "After fighting, everything else in your life gets the volume turned down."

  4. #4

    Re: Parting Out '00 R6

    What condition is the extra red/white 99 street tail in?
    Thanks
    Nate Weber
    #15
    #32 Endurance (Project Mayhem)
    "After fighting, everything else in your life gets the volume turned down."

  5. #5
    Senior Member Jesse Davis's Avatar
    Join Date
    Aug 2002
    Status
    Expert
    Bike #
    37
    Posts
    2,281

    Re: Parting Out '00 R6

    id say 7.5 out of 10, no rash, not borken, but not showroom

    Jesse

  6. #6
    Senior Member Jesse Davis's Avatar
    Join Date
    Aug 2002
    Status
    Expert
    Bike #
    37
    Posts
    2,281

    Re: Parting Out '00 R6

    id say 7.5 out of 10, no rash, not borken, but not showroom

    Jesse

  7. #7

    Re: Parting Out '00 R6

    Jesse did you get my mail about the scotts dampner? Jason / Dynatech

  8. #8

    Re: Parting Out '00 R6

    Jesse did you get my mail about the scotts dampner? Jason / Dynatech

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •