CBR600 F2 Race Bike For Sale

***SOLD!!***

Hi all! I live in Kansas, and am currently racing with MCRA, with the plan of coming down South a little, to play with you guys in the future!

it's time for me to pick up some newer race machinery, and sell my trusty old F2.
It's a '93, with 27,500 total miles - It does have a clean, non-salvage Kansas title, though putting it back to street duty would require more work than it's worth.
This bike is ready to race, and would be a great first race bike, track day bike, or race machine for a vintage class,like WERA V7, CCS Classic, or CMRA Classic, if the class still exsts.
Just over 390 lb., with a full tank, ready to race.

Cheetah race bodywork (lightened OEM seat w/supersport tail)
Zero Gravity double-bubble
Entire bike safety wired with spring clips for quick work
Frame sliders/swingarm lift spools
Fox Twin-Clicker shock with about 700 miles since service
F3 fork internals w/Race Tech springs - less than 600 miles since new fluid, wipers, & seals.
Airtech F3 front fender
F3 rear wheel
Bridgeport right-angle valve stems
EBC 310mm floating rotors w/caliper relocation bracket
EBC petal rear rotor
Russell braided lines up front/Galfer braided line in rear
Russell speed bleeders on front calipers
Carbone Lorraine race pads with lots of life left
900RR front M/C with LP billet cap
Rear M/C reservoir delete/Tygon tube replacement
CRG adjustable billet race levers
Vortex Clip-ons with Rental Kevlar Superbike grips
Pro-Tek billet rearsets
Lefthand switchgear delete/Motion Pro standalone choke cable
Vortex Keyless gas cap
Two Brothers race header with shortened Yoshimura CF RS-3 can
Handmade/polished aluminum exhaust hanger
K&N filter - carbs jetted for filter and exhaust system
NRC stator and pulse generator covers
Factory Pro shift kit
EBC Kevlar race clutches with less than 500 miles
Recent oil change w/
Total-loss charging system w/Alien Motion 8-cell LiPo race battery
Race only wiring harness
Race ignition
Graves fairing stay
Koso RX-2 digital gauge set
D.I.D. 520 ERV3 race chain w/about 600 miles
AFAM 14tooth front/41 & 43 rear sprockets w/about 600 miles
Swingarm trimmed and powder-coated/new black anodized aluminum chain guard
AllBalls bearings/seals in all four wheels, with the exception of 1 sprocket carrier
Brand new NGK plugs
Recently replaced CDI

Will come with Dunlop slicks mounted (worn), Dunlop GP209/GP211A DOT race tires (med compound/1 race & two practice sessions on them), and a set of Michelin DOT Race Power Cup V Front/Power One rear (both med. compound - likely good for 1 more track day.)
Extra rim set for wet races with new Dunlop rains, front and rear OEM rotors, bridgeport right-angle valve stems, and sprocket carrier/cush drive.

$2000

https://farm4.staticflickr.com/3876/...4ebc118c_z.jpg

https://farm3.staticflickr.com/2879/...a7f643bc_z.jpg

https://farm6.staticflickr.com/5573/...95b7960a_z.jpg

https://farm4.staticflickr.com/3730/...77512545_c.jpg

https://farm4.staticflickr.com/3856/...9d728a3c_c.jpg

https://farm3.staticflickr.com/2901/...ea374800_b.jpg

https://farm4.staticflickr.com/3874/...f8e5da49_b.jpg

https://farm4.staticflickr.com/3861/...65dd7850_b.jpg

https://farm3.staticflickr.com/2899/...97c2b5f94a.jpg

https://farm3.staticflickr.com/2930/...85c3ee6c00.jpg