2006 gsxr 600 part out

Parts are from a 2006 GSXR 600.
Some parts will fit other year models.
Ill be at most cmra rounds and would like cash, no paypal. 817-907-4134 everything is obo.

Aftermarket Parts:
Ak20 cartridges w/Fork Cap Extenders (.90 spring and .95 spring = 0.925 spring rate)** $750
Race Tech G2R compression and Rebound valve kit in OEM cartridges (1.0 Springs) **$200
JRI MC10 (550lb spring will come with shims.)* $650
*
Akropovic Slip on with OEM Header $200


Bazzaz ZFi** **$150
Woodcraft Frame Sliders** $35
Woodcraft Engine Covers** $250
*
Vortex 45T rear sprockets 2 total
Vortex 15T front sprocket
EK SRX2 Chain 520. $100 for all only 2 races on them

*
Superbike Tail $50
*
*
OEM Parts:
Front Wheel with Rotors $275
Rear wheel with rotor and cush drive $150
Rear wheel with Rotor and cush drive $150
*
Rear Sprocket carrier $75
Swing Arm. $100
Subframe (with spares) $150
Gas Tank with Fuel pump $100
Radiator $100
Steering Stem $75
Clutch Lever with Perch $25
Rear Master Cylinder. $25
Front Master Cylinder $50
Front Caliper Set (will need seals) $50
Rear caliper $25
*
Engine and Frame Combo $500

I have whats left of the wiring harness with a good ECU.


No title, Clean VIN will provide VIN Check copy
Engine has 11k miles it will need engine rebuild

http://i34.photobucket.com/albums/d1...psqrgi8nca.jpg
http://i34.photobucket.com/albums/d1...pswx9edwba.jpghttp://i34.photobucket.com/albums/d1...psb0yloxyr.jpghttp://i34.photobucket.com/albums/d1...psvwu4hbwz.jpghttp://i34.photobucket.com/albums/d1...psebabaey7.jpghttp://i34.photobucket.com/albums/d1...psx5ejcapw.jpg

Ak20s are being rebuilt right now and will be ready to race.

Ak20s are being rebuilt right now and will be ready to race.

Here are the wheels.
1 rear is pending a sale so I have 1 front and rear left. Wheels and rotors are straight, includes cush drive.
http://i34.photobucket.com/albums/d1...psf0idh81g.jpg

Engine turns over and shifts smooth. For any mechanics this engine is a good deal.

I have a rear wheel, chain, sprockets and rear brake pending sale for an SV rider.

Sale pending on Akrapovic slip on.

.............

Bump........

Motor, frame, ecu and throttle bodies pending sale.

Sold the Motor and the Frame.

I checked with Bazzaz and the ZFI unit will fit 06 to 15 600 and 750 GSXR's. I have everything needed to download the proper maps for your year model included. (besides a computer)