Swingarm spool bracket broken on GSXR750: Suggestions?
My left spool bracket on the rear swingarm of my GSXR750 has sheared off.
I was wondering if any of you folks have been in a similar situation and if so... I was wondering what you did to fix it?
I'd like to use my rear spool stand again... but obviously can't right now. If any one has any ideas or fixes... I'm open.
Thanks!
Bob
Here's a pic of the right side with the spool bracket in place:
Here's the left side with it broken off:
? still got the piece that broke off ?
Last edited by Alan Etheredge; 01-30-2015 at 01:12 AM. Reason: had to ask
Alan Etheredge, Associate and Interested Observer ~2003-2019
At-Track Registration Staff ~2003-2017; CMRA Administrator 2009.
Unfortunately... no.Originally Posted by Alan Etheredge
Contact Mike at Minette Enterprises. He runs an old school hot rod/fabrication shop near 635 and I35E. He can fabricate the piece and weld it on.
11586 Reeder Road
Dallas, TX 75229
(972) 241-7184
Ryan Andrews can also fix it if your local shop can't.
one tip...you can cut down on the total labor charge if the part is wire brushed, then sanded and degreased(preferably with acetone) before you get to the shop.
it will kinda give your guy a head start on the repair work.
it will go faster if you pull the swingarm too. then he can just lay it on the bench and do it in the comfort of a chair.
plan b would be to buy another swingarm. its almost as cheap as an hour of labor at most competent shops.
Buy a used swingarm. You can find one for $50-75 bucks. I have sheared them off before.
Brandon Persell
CMRA Novice #901
Triple P Racing/ 2000 SV650 / 2004 GSXR-750
Good suggestion...one on there now for $44, free shipping. Depends on your year.
http://www.ebay.com/itm/11-13-2011-2...-/121551427653
Heinz Roy
Novice #458 | BTO Racing #58 (Mini Endurance)
Not a complete idiot, some parts are on backorder.
Thanks to...Lucas Oil Products | Dunlop Tires | BDtrackside.com/Vesrah Brake Pads | SoloMotoParts.com | 212Decals.com | Moto Liberty
Yeah, eBay or just use the rubber pad brackets with those tabs as the stops, which will keep the swingarm from sliding down the stand.
Sean GRRRvich
[- USBMOTORSPORTS -|- RaceworX -|- Blevins Paint & Body Shop -|- Ty Howard #35 -|- RideSmart -|- LSTD -|- Dunlop -|- F1: Breast Cancer Research Foundation / P1 Formula One -|- Asb: 212Decals.com -|- F40: HighPerformanceCrew.com -]
Get a set of Gilles chain adjustors with the gp lifters and never have to deal with broken spool tabs again.
CMRA #67
I have swing arms instock for$50 or i can weild it $50
469-285-2493 David
Posting Permissions
Reply With Quote