RS 80 Carb question

[Bryan Norton]

FWIW I've never ran a power jet on any of my 2 strokes...
80cc or RZ350

[Bryan Norton]

FWIW I've never ran a power jet on any of my 2 strokes...
80cc or RZ350

[Chris Thomas]

See now, this is why I ask you guys this stuff.

I WAS mistaking this for the accelerator pump. (four stroke mx guy ya know)

Thanks again.

Chris

[Chris Thomas]

See now, this is why I ask you guys this stuff.

I WAS mistaking this for the accelerator pump. (four stroke mx guy ya know)

Thanks again.

Chris

[Jiveturky]

Chris,

I am running a stock cr 80 carb on a 2001 cr 80 motor. The bike performs really well, and several people have said the same thing. I like to think I just get a better drive out of the corner but people always say I pull them on the straight. [img]/ubbthreads/images/%%GRAEMLIN_URL%%/smile.gif[/img] The motor is completely stock except for a power reed.

Later, Eric

[Jiveturky]

Chris,

I am running a stock cr 80 carb on a 2001 cr 80 motor. The bike performs really well, and several people have said the same thing. I like to think I just get a better drive out of the corner but people always say I pull them on the straight. [img]/ubbthreads/images/%%GRAEMLIN_URL%%/smile.gif[/img] The motor is completely stock except for a power reed.

Later, Eric

[troysturtz]

While we are on the subject.

I am going to run an 01 CR-80 motor with a PWK 28

Problem being that I found a good deal on the carb and it was not set up for this motor.

I would be very appreciative if somebody fill me in on what slide, pilot and main seems to work well.

Thanks,

Troy

[troysturtz]

While we are on the subject.

I am going to run an 01 CR-80 motor with a PWK 28

Problem being that I found a good deal on the carb and it was not set up for this motor.

I would be very appreciative if somebody fill me in on what slide, pilot and main seems to work well.

Thanks,

Troy

[Jack Giesecke]

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by Bryan Norton:
FWIW I've never ran a power jet on any of my 2 strokes...
80cc or RZ350 </div></div>I have, on TZ250s, but they don't make the rather excellent Lectrons anymore. EI ain't the same thing, close, though. What I really liked about the Lectrons was they were awesome easy to jet. Needle did everything but half throttle up was boosted by the power jet.

[Jack Giesecke]

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by Bryan Norton:
FWIW I've never ran a power jet on any of my 2 strokes...
80cc or RZ350 </div></div>I have, on TZ250s, but they don't make the rather excellent Lectrons anymore. EI ain't the same thing, close, though. What I really liked about the Lectrons was they were awesome easy to jet. Needle did everything but half throttle up was boosted by the power jet.