All,
I am converting a 1999 CBR 600 F4 to Superbike spec for this year and am looking for HRC kit parts for it. In particluar I am looking for the following:
Ignitor Box
Head Gaskets
Flywheel
Stator
Valves
Clutch Springs
Wiring Harness
The *Mystery Part
Cams
Is my only recourse to go through a Honda dealer or are there other alternatives? I am finding very little information on these parts through web/ebay/etc searches.
Thank you all for your input,
David Durrant
#102
All,
I am converting a 1999 CBR 600 F4 to Superbike spec for this year and am looking for HRC kit parts for it. In particluar I am looking for the following:
Ignitor Box
Head Gaskets
Flywheel
Stator
Valves
Clutch Springs
Wiring Harness
The *Mystery Part
Cams
Is my only recourse to go through a Honda dealer or are there other alternatives? I am finding very little information on these parts through web/ebay/etc searches.
Thank you all for your input,
David Durrant
#102
Your best bet may be to see if Erion Honda has any parts left laying around. Another source for the HRC black box and wiring harness may be through Harris/UK, or Dan Kyle/Kyle USA.
Lighten/turn the flywheel, mil the head 30 thousands,3 angle valve job on the heads along with a little porting. Good luck, old school Honda 600!!!!!
Your best bet may be to see if Erion Honda has any parts left laying around. Another source for the HRC black box and wiring harness may be through Harris/UK, or Dan Kyle/Kyle USA.
Lighten/turn the flywheel, mil the head 30 thousands,3 angle valve job on the heads along with a little porting. Good luck, old school Honda 600!!!!!
Thank you. I've sent requests off to Erion, Honda North America, my local dealer and a bunch of shops on the west coast that apparently tried the same thing.
I've also been told to get a hold of Mike Valesco, apparently a famous tuner, to search for parts and info. However, all my searches and attempts have yielded nothing. Anyone know how to contact him or who he is?
Thank you all again,
David
#102
Thank you. I've sent requests off to Erion, Honda North America, my local dealer and a bunch of shops on the west coast that apparently tried the same thing.
I've also been told to get a hold of Mike Valesco, apparently a famous tuner, to search for parts and info. However, all my searches and attempts have yielded nothing. Anyone know how to contact him or who he is?
Thank you all again,
David
#102
stop searching and call or email Jim Cambora at Raceworx...he'll fix ya up...i think his email is raceworx@aol.com
stop searching and call or email Jim Cambora at Raceworx...he'll fix ya up...i think his email is raceworx@aol.com
David spend half that on a 03 R6 and smoke any F4 superbike around.
The Short Bus Races Again!
David spend half that on a 03 R6 and smoke any F4 superbike around.
The Short Bus Races Again!
Posting Permissions
Reply With Quote