WTB: 17 inch rims for '95 XR100 Motard Project

[Ben Phillips]

My son and I are planning to just run the drum brake at this time, but maybe there is a package deal out there for CRF 80 forks/laced wheels with the disk setup? This bike is stock so maybe I can get really lucky and find both a stiffer rear and fork springs.

[Ben Phillips]

My son and I are planning to just run the drum brake at this time, but maybe there is a package deal out there for CRF 80 forks/laced wheels with the disk setup? This bike is stock so maybe I can get really lucky and find both a stiffer rear and fork springs.

[Jason Keene]

buy these and lace your hubs... I can't remember if the xr 100 has a 32 spoke or 36 spoke rim... count and double check of course...
http://cgi.ebay.com/ebaymotors/Excel-Tak...sQ5fAccessories

[Jason Keene]

buy these and lace your hubs... I can't remember if the xr 100 has a 32 spoke or 36 spoke rim... count and double check of course...
http://cgi.ebay.com/ebaymotors/Excel-Tak...sQ5fAccessories

[Ben Phillips]

Thanks for the lead, but won't a 4.25" rear be a little large for a stock XR 100 swingarm? I don't know. Where is Roger Albert when you need him?

[Ben Phillips]

Thanks for the lead, but won't a 4.25" rear be a little large for a stock XR 100 swingarm? I don't know. Where is Roger Albert when you need him?

[Jason Keene]

It would... you need a 3.5" on the rear

The wheel would work on the rear (still can't rememer spoke count) and the price is right...

I have a complete CR 85 front end... 17 x 2.75" excel wheel )brushed aluminum finish, brakes and trees with a renthal fatty handle bar... It would go on the xr100 very nicely... It's a great set up to go inverted front end and disc brakes at the same time... It has a bridgestone slick on it right now...

I'd do the whole enchilada for 850

I was thinking about building another 150 motard but will consider selling it. Work has been slow and that means somethings may have to go...

[Jason Keene]

It would... you need a 3.5" on the rear

The wheel would work on the rear (still can't rememer spoke count) and the price is right...

I have a complete CR 85 front end... 17 x 2.75" excel wheel )brushed aluminum finish, brakes and trees with a renthal fatty handle bar... It would go on the xr100 very nicely... It's a great set up to go inverted front end and disc brakes at the same time... It has a bridgestone slick on it right now...

I'd do the whole enchilada for 850

I was thinking about building another 150 motard but will consider selling it. Work has been slow and that means somethings may have to go...

[Jason Keene]

Here is a pic of the front end I was telling you about... [img][/img]

[Jason Keene]

Here is a pic of the front end I was telling you about... [img][/img]