That bicycle light appears to light up white, though?
That bicycle light appears to light up white, though?
If OEM tail light assemblies aren't legal.... Is it ok to mount the after market light of choice like an OE tail light would mount? By that I mean flush mounted in the tail section at the very end of the under tail.
Walter Walker
Director of Competition
254-717-6848
walter@cmraracing.com
CMRA Ex #43r
Member since 1990
(NOT mean and unapproachable)
No, I'm betting he goes with this set-up:
http://www.ebay.com/itm/BICYCLE-BEAC...-/150576586072
Probably go over and have Byus install it for him at his house. They'll cook up some scheme to pull off the excess current and feed it back into the ignition system to "give it more power".
It'll catch on fire in Houston.
Last edited by Dave Felio; 01-07-2016 at 06:56 AM.
Ok after giving it some thought I'm going to back off of the "no OEM taillights allowed". OEM tail lights that are integrated (flush with the surface of the tailsection) into the tailsection will be allowed. However the lens must be covered with a clear film. I'll put together a Technical Bulletin today to outline what will be allowed and guidelines for rain lights.
Walter Walker
Director of Competition
254-717-6848
walter@cmraracing.com
CMRA Ex #43r
Member since 1990
(NOT mean and unapproachable)
I'm planning on dangling a real live burning road flare from some twine (don't want to waste good safety wire).
I'm kidding of course.
Allen Dye