Page 1 of 32 1234511 ... LastLast
Results 1 to 10 of 320

Thread: UPDATED! 11/23/13 2014 Rule and Class Structure changes

  1. #1
    Administrator Walter Walker's Avatar
    Join Date
    Aug 2002
    Location
    Waco Texas
    Status
    Expert
    Bike #
    43R
    Posts
    7,470

    UPDATED! 11/23/13 2014 Rule and Class Structure changes

    Note: I've moved all announcements to date to this post,

    Updated: 11/23/13 at 8:52:48PM

    1) 500 Classic
    Up to 500cc 4-stroke air and water-cooled twins
    Up to 400cc 2-stroke air and water-cooled twins (Keith H. & Ryan W. I better see an RD on the grid next season!!!)
    Any bodywork allowed.


    500 Supersport (no Expert/Novice differentiation)
    Honda CBR500 allowed

    300 Supersport (no Expert/Novice differentiation)
    Kawasaki EX300 (Ninja) allowed.


    E Superstock (no Expert/Novice differentiation)
    Up to 250cc 4-stroke air and water-cooled twins
    Up to 250cc 4-stroke air and water-cooled singles
    Any bodywork allowed.
    No engine modifications allowed.
    All machines may be upgraded to 17” wheels so long as they do not weigh less than the stock wheels for that model.
    Kawasaki EX250 (Ninja), Honda VTR 250, CBR250R, YamahaWR250X and Buell Blast using Superstock rules with airbox modifications or individual filters allowed. Aprilia RS125 (street bike) with
    aftermarket exhaust and carburetor allowed. Formula 4 machines allowed


    The Following will replace the CMRA Mini Endurance series:

    CMRA Lighweight Endurance Series Classes

    500 Classic

    Per 500 Classic sprint rules

    500 Supersport

    Per 500 Supersport sprint rules

    300 Supersport

    Per 300 Supersport sprint rules

    E Superstock

    Per E Superstock sprint rules

    Formula 4

    Per CMRA Formula 4 sprint rules


    Supersport

    The following is a brief overview of the Supersport rules package. Bare in mind that in the final version of the 2014 Rulebook Supersport will likely refer to the Superstock section and only list the items that are different. The following list is being posted in this form to help those that are preparing machines for these classes. The intent of these classes is to promote close competition while keeping cost to a minimum. The CMRA will maintain a list of MSRP pricing for available components. The CMRA reserves the right to disallow any component based on cost. (I'll make this sound better in the final version.)

    a) Bodywork must be an exact replica of the OEM bodywork with the following exceptions. Solo tail allowed. Headlight, taillight, and turn signal openings may be covered or filled in. (pending availability)
    b) No engine or airbox modifications allowed. Aftermarket replacement air filters are allowed.
    c) OEM Exhaust system may be replaced with aftermarket.
    d) OEM Fuel management system may be supplemented and or replaced with aftermarket.
    e) OEM rear shock may be replaced with aftermarket.
    f) OEM Fork internals may be modified or replaced.
    g) OEM hand and foot controls may be replaced with aftermarket.
    h) OEM brake lines and brake pads may be replaced with aftermarket
    i) OEM chain and sprockets may be replaced with aftermarket. Alternate gear ratios are allowed.
    j) No quick shifters.
    k) No traction control allowed. (I know I Know but somebody will ask)
    l) OEM subframes must be retained and remain unmodified.
    m) Unnecessary brackets may be removed from the chassis. Nothing may be cut off of the frame, swingarm, or subframe without prior CMRA approval.
    n) Lighting and unnecessary electrical components may be removed but must be done so at the factory connectors. Wire harnesses must remain unmodified
    .


    2) All machines in all classes will be required to have front brake lever guards.

    3) Endurance pit stops, any and all work performed on the machine must be completed before refueling may commence.

    4) Endurance race starts, all endurance machines must be on the starting grid or false grid no later than 10 mins before the scheduled race start time. Tire warmers and generators will be allowed.

    5) 2013 and up Kawasaki 636 will be allowed in C Superstock.

    6) Classic 600s will be allowed in F2 Endurance

    7) Grom Challenge (JD and Ryan Andrews talked me into it.)
    Honda Grom allowed using Supersport rules with the following exceptions.
    No clip-ons
    No rearsets.
    No fuel controllers.
    Airbox may be replaced with pod type air filter.
    Throttle body may be repositioned.
    OEM final drive ratio must be retained.
    No aftermarket bodywork, all OEM body panels must remain in place.
    Last edited by Walter Walker; 11-23-2013 at 10:31 PM. Reason: Updated

  2. #2
    Senior Member
    Join Date
    Dec 2012
    Status
    Novice
    Bike #
    622
    Posts
    558
    got me...

  3. #3
    Senior Member
    Join Date
    Jun 2011
    Location
    Temple, TX
    Status
    Novice
    Bike #
    991
    Posts
    124
    Me too.
    Team Owner
    Mahna Mahna
    Somebody

  4. #4
    Administrator Walter Walker's Avatar
    Join Date
    Aug 2002
    Location
    Waco Texas
    Status
    Expert
    Bike #
    43R
    Posts
    7,470
    Haha! later today folks.
    Walter Walker
    Director of Competition
    254-717-6848
    walter@cmraracing.com
    CMRA Ex #43r
    Member since 1990
    (NOT mean and unapproachable)

  5. #5
    Senior Member David Roy's Avatar
    Join Date
    Jan 2007
    Location
    Argyle. TX
    Status
    Expert
    Bike #
    14
    Posts
    1,283
    David Roy
    Owner
    North Texas Superbikes
    www.northtexassuperbikes.com . 817.845.4051

  6. #6
    Quote Originally Posted by Walter Walker View Post
    Haha! later today folks.
    SSSOOOO "later today" , yesterday means thursday of next week??

  7. #7
    Administrator Walter Walker's Avatar
    Join Date
    Aug 2002
    Location
    Waco Texas
    Status
    Expert
    Bike #
    43R
    Posts
    7,470
    Sorry, I didn't finish loading until 3am and I've been at the track all day.

  8. #8
    Senior Member Alan Etheredge's Avatar
    Join Date
    Apr 2003
    Location
    Cedar Creek, TX
    Posts
    2,165
    Quote Originally Posted by Walter Walker View Post
    Sorry, I didn't finish loading until 3am and I've been at the track all day.
    Livin' the Dream for sure



    Thanks for all you do, WW
    Alan Etheredge, Associate and Interested Observer ~2003-2019
    At-Track Registration Staff ~2003-2017; CMRA Administrator 2009.

  9. #9
    Administrator Walter Walker's Avatar
    Join Date
    Aug 2002
    Location
    Waco Texas
    Status
    Expert
    Bike #
    43R
    Posts
    7,470
    Bump!
    Walter Walker
    Director of Competition
    254-717-6848
    walter@cmraracing.com
    CMRA Ex #43r
    Member since 1990
    (NOT mean and unapproachable)

  10. #10
    Senior Member Heinz Roy's Avatar
    Join Date
    Jun 2009
    Location
    Dallas, TX
    Status
    Novice
    Bike #
    458
    Posts
    1,242
    Quote Originally Posted by Walter Walker View Post
    Bump!
    Bump indeed!

    2014 will be interesting...thanks Walter!
    Heinz Roy
    Novice #458 | BTO Racing #58 (Mini Endurance)
    Not a complete idiot, some parts are on backorder.
    Thanks to...Lucas Oil Products | Dunlop Tires | BDtrackside.com/Vesrah Brake Pads | SoloMotoParts.com | 212Decals.com | Moto Liberty

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •