Custom Sprocket Makers

[Jim Dugger]

I've got a front sprocket I need cut I cannot find anywhere. It's "unusual" in that it has integrated spacers on the drive shaft fitting. The spline fitting should be the same as an RSVR1000, however.

Does anyone know someone in the D/FW (or anywhere, really) area able to reverse-engineer a new sprocket from an old one provided as an example?

[Ben Gooding]

http://pmpsprockets.com/customer_service Local, in Wylie.

Getting a front from them, might be a challenge.

They cut a few rear Duc sprockets for me a few yrs ago and was happy with their product.

[Jim Dugger]

Thanks.

PMP Doesn't cut fronts.

[Carl Price]

Try supersprox I think they do custom stuff

[Dennis King]

Chris coffey

[Vaughn Ivey]

Did you check with Sprocketspecialists.com ?

[Jim Dugger]

Chris coffey

Can he cut this?

Most places are reporting they don't have the broach to cut the drive splines.

[Cody Stewart]

Chris can't do that, 99% certain. You need a legit machine shop for that type of work.

Now if you have a broken one, I'm sure he could weld it back together for you ;)
-Cody

[Scott Finning]

You might try these guys...

http://www.rushgears.com/gear-types/sprocket

[Keith Hertell]

nvrmnd