Custom Sprocket Makers

[Jim Dugger]

its my pic and my measurements. the actual is at ecr...

[Sean Gurevich]

I almost passed out from the sudden and prolonged decompression my lungs experienced when I saw this post.

[Jim Dugger]

There are days I miss the belt. The sprockets never wear out... the belts last about as long or better than the chain.

Sigh...

[Brandon Orr]

I almost passed out from the sudden and prolonged decompression my lungs experienced when I saw this post.

I knew it would take someone with a higher level of intelligence to understand the joke.

[Jim Dugger]

Ok, it's an EBR Part Number: G0440.09AZ -- can you get those, Ted? Apparently there's 58 in stock.

[Ted Phillips]

We can get EBR parts through PU but not the older Buell parts. Do you know who has 58 in stock? If it's PU I can ask our Rep to allow us to order them.

[Jim Dugger]

Should be a PU available part. It's an EBR part number.

[Ted Phillips]

I'm givin' it's all she's got, captain!

[Jim Dugger]

Ugh, sorry for sending you on a goose chase.

I know why they aren't showing up now. They are made of real unobtanium. Meaning, they exist, but cannot be had.

Can we contact Esjot?

I've had 3 other vendors in the US respond they don't make fronts...

[Chris Coffey]

Can he cut this?

Most places are reporting they don't have the broach to cut the drive splines.

Attachment 668

I cannot.

The thing that makes that hard is the big thick center where the output shaft goes.

I have had timing sprockets made, but not drive sprockets like that.

Let me know if you can't find someone, I have some contacts but will have to dig for them.